6 Inch Horse Bits

6-inch horse bits

Bits for single trips, team trips and horse riding can be found. There is a wide range of Liverpool bits, elbow bits, snaffle bits, butterfly bits, rubber mouthpieces and much more. Especially for the draught horse or draught cross. 6-inch mouthpiece in an articulated bridle or mouth. A simple snaffle bit exerts pressure on the horse's tongue to facilitate the control of the horse.

EVERY BITS

Our Draft Horse and Warmblut Bits are all made of massive high-grade steal, unless otherwise indicated. Size: 6 1/2" sizes: SIZE 6 ", 5 1/2" The single bridle drill exerts on the horse's tongues to facilitate the control of the horse. 3 inch ring bracelet.

Size: Built-in 5 1/2" & 6" sizes: "Three ring sizes: Size: "6 "6", 6 1/2", 7" This ring bridle has a bent jaw for the horse's comforts. In addition, most of our ponies need 1/4". Bits SW are made of very fine 18-8 (chrome/nickel) high-grade steal. It is the most suitable for bits because it is highly resistant to salts and acid in the spit and never rusts or stains.

Bits are investments (lost wax) from meticulously manufactured patterns of bits that have been thoroughly checked to ensure consistent, flawless product consistency. The horse will appreciate the special attention paid to the development and production of SW bits. Dimensions:

Swirled wires irritate the corner of the teeth more than a piece. This nickle-coated denture is used to facilitate the reaction when a horse becomes overweight. Swirled wires irritate the corner of the teeth more than a piece. Dimensions:

"6 "6" This is a powerful bit used to facilitate the reaction when a horse becomes difficult on the bits. Swirled wires irritate the corner of the teeth more than a piece.  This is a thick bit used to facilitate the answer when a horse becomes heavier on the Bit.

Doubly stranded wires irritate the corner of the teeth more than a flat piece. Nose length with phalanx: 6 ", 6", 6 1/2" & 7" 2 3/4" loose rings with sweet iron French tie mout. Oral is 18mm at the rim of the loose ring. Available sizes - 6", 6 1/2", 6 3/4" Made of fine 18-8 (chrome/nickel) high-grade steal.

It is the most suitable for bits because it is highly resistant to salts and acid in the spit and never rusts or stains. Bits are investments (lost wax) from meticulously manufactured patterns of bits that have been thoroughly checked to ensure consistent, flawless product consistency. Sizes: 5 1/2", 6", 6 1/2", 7" A ring bridle made of nickel silver.

Alloyed with 65% Cu, 12% Ni and 23% Zn, German silver is better than high-grade st. th... It' got 3-inch wheels and a thick ova. Size: Size 5 1/2": "5 "5", 5 1/4", 5 1/2", 6", 6 1/2", 7" The ring drill has a bent jaw and an ovale cupric member.

This is a very soft, sacred set of teeth for delicate ponies. There are 3 " circles and it is 1/2 " (13cm) at the rim of the throat. Due to the arched jaw, allow for 1/4" excess length for the jaws. Dimensions: Five and a half", six", six and a half", seven" sizes: 1/4 ", 6 3/4", 7" Size: 6", 6 1/4", 6 1/2", 7" A soft piece that does not squeeze the corner of the jaw.

Usually the high-grade steal ovals do not pass through the jaw. A well-bred horse. Size: The 5 1/4", 5 1/2", 6", 6 1/2", 7" side parts are high-grade surgical grade metal ovals that are 4" high x 3" in width and do not normally pass through the jaw. This is a smoother piece than the bridle for a well-behaved train.

This compound alleviates the nut-cracker effect of the bridle opening on the lingual surface. Size: EGBUTT 5 1/2" Bridle with Bits SW are made of 18-8 (Chrome/Nickel) high-grade steal. It is the most suitable for bits because it is highly resistant to salts and acid in the spit and never rusts or stains.

Bits are investments (lost wax) from meticulously manufactured patterns of bits that have been thoroughly checked to ensure consistent, flawless product consistency. The horse will appreciate the special attention paid to the development and production of SW bits. Ringsize: 2 1/2" sizes: This Eikolbentrense 5 1/2", 5 3/4", 6", 6 1/2", 7" has a swung mouths and is part of the new horse dentition family.

Developed for the horse's convenience, the Eikolben prevents possible bruising of the lip. Its curvilinear mouths are formed over the horse's tongues and the Cuprio waffle is a taste a horse loves. All our SW bits are made of the very best 18-8 (chrome/nickel) high-grade steal. It is the most suitable for bits because it is highly resistant to salts and acid in the spit and never rusts or stains.

In addition, most of our ponies need 1/4". Oral side is 1/2" (14mm) thick. Size: The 5 1/4", 5 1/2", 6", 7" side panels are 3 1/2" high and 3 " stainless steel with large stainless steel ring, which do not normally pass through the jaw. Swirled mouths offer more attentiveness than the normal bridle-jaw.

Size: Do not squeeze the ring into the edges or drag it through your jaw. The oral diameter is 15 mm. It has two turns on each side of the bridle-hole. Size: Side panels of high-grade steal are 2 1/2" high, 1 1/2" high. It has a sweaty smooth tip with a contorted jaw that attracts more interest than the regular bridle tip.

Size: The 6 1/2" & 7" D-ring bridle gives a light help in direction by using the horse's face, similar to the full cheeks bridle. There is no D-ring in the corners of the oral cavity. in stainless steel: This set of dentures has a 5 1/2" artificial lips that are soft to horse and horses fangs.

It is not necessary to warm up before inserting into the horse's jaw. Dimensions: 5 1/2", 6", 6 1/2", 7" Ring size: 2 ½" I.D. *Sizes recorded on 5" bits. Different dimensions proportionally. Dimensions: "5 "5", 5 1/2" Ring size: 2 1/2" I.D. Size: 5 1/2", 6", 6 1/2" This quire has a bent orbit.

Dimensions: Five and a half", six", six and a half", seven" mouths:: "6 "6", 6 1/2" eggbutt mouths - won't get the corner of your jaw. "8 "8" jaw, 2 1/2" ring sizes: This Full-Cheek Slow Twist Bridle is a little that puts a little downward force on the cheeks to help steer.

Twist-Maul will help to keep the horse's eyes open. "8 "8" cheek with 2 1/2" ring sizes: This chisel allows the horse to gulp, hence the name. A great lever to stop, this set of teeth is great for the well brought up and trained horse.

Conceived for use with a horse that wears the rein on its throat. High-grade high-grade stell mouth sizes: Copper mouth size 5 1/2", 6", 6 1/4" and 6 1/2": The Pelham Mullen mouth is a gentle piece with lever-action. Size: "6 "6" Made of the very best 18-8 (chrome/nickel) high-grade steal.

It is the most suitable for bits because it is highly resistant to salts and acid in the spit and never rusts or stains. Sizes: 5 1/2", 6", 6 1/2", 7" cheeks are 4" from the top of the ring with the necklace down The central ring is 1 1/2" broad.

This chisel is made of high-grade with a 21mm elastic mouth. Manufactured from the very best 18-8 high-grade chrome and nickle plated metal. It is the most suitable for bits because it is highly resistant to salts and acid in the spit and never rusts or stains.

Sizes: 6, 6 1/2" cheeks are 6" from the top of the ring with the necklace down The center ring is 2 inch broad. and the lower ring is 1" mouthpieces have a warm feeling for the horse's jaw. Eventually, those who do not readily tolerate high-grade steels will take gum.

It is also suitable for horses with delicate sticks or tongues. It is a less severe option than high-grade steal because the nozzle is usually thinner, distributing the air flow over a wider area. However, a gum bite can be inadequate if your horse has bigger meaty limbs and/or a big mouth.

Pages are 6" center of the Mullen mouth is 12mm, 1/2" sizes: "6", 6 1/2" sizes: Size 5 1/2", 6, 6 3/4", 7, 7 1/4": Size: 5 1/2, 5 3/4", 6", 6 1/2" and 7" Butterfly bits: 6", 6 1/2" 7" Handmade in the UstaThis Westerner gags bits has a cute irons middle pot sweet nozzle.

Sizes: 6 1/2" Size: 6 1/2" Sizes: "6 "6", 6 1/2" full grade 316L bits with 3" height and 2 1/4" above the D-rings. It' is 5/8'' at the broadest point where the orifice opens into the D-ring. Sizes: 6 1/2" sizes: Sizes: 6 1/2" sizes: "6", 6 1/2", 7" sizes:

"6", 6 1/2" sizes: "6", 6 1/2", 7" sizes: Sized: 6". Sleeve thickness: 18 mm* Ring size: 3" 7 ½" Dimensions 5 1/2", 6", 7" sizes: "6" and 6 1/2" sizes: 6" and 6 1/2" sizes: "6 "6" and 6 1/2" shafts have a 7 1/4" size: That articulate mouths are made of soft irons.

This is 7/16" MADE IN THE USA!!!!! The 3 pieces ring has a sweaty metal mouths with cup ring in the middle of the bones. Sizes: 6". Cute three-part ferrous bridle with a dogbone central part. Sizes: 6". That cute, ferrous muzzle gives the horse a flavour it likes.

Sized: 6". Dimensions: These teeth act on the noses, the corner of the horse's mouths and the kerb for full posture monitoring of your horse's heads.

This bridle adapts to the oral cavity, creating a sweaty, reactive opening. We have another one in 5 1/2" sizes: Inch and 7" size: 7 Sized:: Dimensions: "7" sizes: . Dark, sweaty steel gives your horse a flavour he likes.

Egg-kick sides don't squint the horse's muzzle. Wrong wiring is a powerful and powerful mouths with good braking effect. It has a 5/16" (8mm) thick nozzle. Sizes: 6". Made of stainless steel, with armoured chain and hook. There is also a good side check of the horse. A low mouths fits snugly over the tongues, exerting evenly distributed force on the jaws via the bridges.

Size: It is supplied with a kerb link and hook. It' a good stop check for a horse that is a little more difficult to stop. There is also a good side check of the horse. A low mouths fits snugly over the tongues, exerting evenly distributed force on the jaws via the bridges.

Size: Available in 5 3/4", 6" & 1/2" sizes: A chisel made of high-grade steal allows the horse to gulp, hence the name. A great lever to stop, this set of teeth is great for the well brought up and trained horse. Conceived for use with a horse that wears the rein on its throat. Size: "6", 6 1/2", 7" sizes:

The side walls of high-grade stainl. steal are 6 1/2" from top to bottom. Their mouths are cute with a 1 1/2" brass member, both tastes like a horse while the teeth are in their mouths.

Auch interessant

Mehr zum Thema