Cheap Equestrian Helmets

Inexpensive riding helmets

Reithelm-Update - The No. 1 resource for equestrian farms, stables and coaches It' not unusual for a person who falls from a saddle to suffer a scalp wound; a hat protects this inestimable part of your system - your mind. If you don't participate in any kind of sport such as events, jumps or polos, there is always the danger that you will fall or be cast, even by the most supple of horses.

In order to minimize the risks of trauma to the brains associated with equestrian sports activity, many equestrian sports venues, in particular those of the United States Equestrian Federation (USEF) and the Federation Equestrian International (FEI), need a hat to protect each of them. SEI is an independent safety equipment institute that verifies and certifies that helmets comply with ASTM International-standard.

New ASTM Hemeting Specification was introduced in January 2016. Previously the ASTM F1163 April was used, which has now been amended to ASTM F1163-15. The actual modifications have very little effect on the shell construction. The new name changes the fact that helmets with a broader variety of heads are used.

Remains unchanged are the max. admissible collision force, the limitations of the crutch cover on the top and the retaining belts. Most of the US manufacturer of helmets surpass ASTM/SEI-norms. US-made helmets with the existing or new ASTM marking still comply with USEF demands on the wear of drivers participating in crash helmets.

Féédération Internationale de l'école demands the use of a racing hat for all events on the showground. There are few exemptions for vaulters and riders. The older ASTM F1163 and the new ASTM F1163-15 can still be bought and used as wearable headwear on any show, as both have successfully completed the ASTM test.

On the inside of the shell there is a seal or sticker confirming that it is ASTM/SEI-marked. Kindly be aware that the production requirements of other jurisdictions may differ from those in the United States; if you buy a pair of helmets outside the United States, make sure they have a double stamping to obtain ASTM/SEI certify.

ASTM tests specify the shell's capacity to be crushed on collision, ensuring that it will absorb most of the brain injury and not the brain injury that will be picked up by the skull. A further criterion that must be fulfilled is the existence of a three-point belt that it is safe - cheek belts are favoured as the safest way to attach the crash and/or kickoff crutch pad.

And a third criteria of the norm protect the driver's nape from hazardous torques by making sure that the outside of the shell can glide over the floor. The SEI test comprises several stages with computer accelerometers that document the collision force: Drop the headgear onto a shallow incus from a six-foot level from different viewing angle and direction.

It is also lowered onto an anvil that has a clear edge to replicate the collision of a rider's skull when jumping or hoofbeating. Then, the crest is placed on a shape similar to the shape of the bones of humans; the crest is weighed down with belts and then drop.

Helmets are further checked for the three above mentioned factors - impact and retentions - after they have been frozen to minus 20oFA, heated to 120oFA and immersed in cold or cold waters night. Irrespective of the SEI certified state of the hearing aid, it only functions optimally if it is in the correct position. If you wear a hat, think about how you could wear your head of steel when you put it up, wear barrettes or let it down.

When you want hair style you can buy a seperate hat for each use. What is your choice of the required sizes? Use a fabric scale to check the girth at the broadest point of your skull. Troxel, a reputable manufacturers of helmets, recommend some general fitting rules:

You should place the crest of the headpiece so that it is positioned paralell to the floor. Do not move the headgear slightly forwards or backwards. Using your upper part of the headgear, as you try to move it, front and back and side by side, your brow and brow should move with the headgear.

You should be able to lean forward without the chin strap, without the headgear dropping forward or backward. The occiput is located at the cranial basis - the crown should protect this area. Make sure there are no spaces on the sides of the hat, even if it is tight. In the same way you would try a couple of boots by carrying them and running around for 15-30 min, do this with a new hat that you try out.

Shaking your skull should keep the headpiece in place. Helms are so cheap anymore, there's no need to ever buy a used hat or hire a friend - not only do you not know if there is previously an effect that makes it worthless shelter in the fu -ture or it might not suit you well.

Furthermore, the manufacturer recommends to replace a hard hat every five years from the date of sale, even if it has not been damaged; material tends to deteriorate due to warmth, humidity and use. As the American Association of Neurological Surgeons (AANS) reports: "While some 18% of all horseback riders suffer severe injury to their heads, they are the main cause of hospitalization.

It is advisable for everyone who sits on a saddle to wear a suitable hat with these figures in the back of their minds. ASTM/SEI-approved helmets are thought to have cut ride related injury to the wearer's heads by 50%.

Mehr zum Thema