Skull Riding Hats

Riding caps with skull

This is Charles Owen Fian Riding Hat Ladies. A huge collection of the latest standard riding hats, Riding Skull Caps and a large selection of Skull Cap Covers and accessories. Riding Skull Riding Hats by Ride-away Looks elegant and classy while riding with our choice of skull caps. You will find the right riding helmet for you, whether in show jumps or off-road, perfectly suited for competition in the sport of your choice. Charles Owen, Champion and Gatehouse are sure to have the right riding cap for you at Ride-Away, and if you're looking for a dash of color, we have a great variety of colorful skull caps to match your character, such as Navy, Silver and Black.

During riding we will understand that it can sometimes get a little bit hot, so many makes with this minds have caused louvers inside the skull hats to allow breathing activity and stream of breath so you can make sure you keep your chill while in the saddle. However, it is important to keep the skull hats comfortable.

Rideaway Skull Riding Hats for Children

Have a look at our vast selection of children's skull caps, which are available in different versions for different sports. At RideAway we are always looking for the latest technology and design, so we select the latest models from top names like Charles Owen, Champion and Gatehouse to provide the best possible shelter.

Each of our hats carries the latest standards of security so you can safely horseback riding while you' re safe in the seat. Whether you are in competition and need air conditioning to keep you cold under competitive conditions, or whether you drive every single working days, we have the right cap for you.

Firewall - Access not allowed

list your Internet Protocol (IP), or if you think this is a bug, please open a customer service request and make sure you provide the blocking information (see below box) so that we can help you fix it.

Notepad details:

Caps & Skulls

Any manufacturer of riding hats must manufacture hats that comply with one of three internationally recognized security norms or symbols - PAS015:2011, EN1384:1996/BSEN1384:1997 and ASTM F1163:04a - some may even manufacture hats that comply with all these norms..... Because every one of these is tested for a different type of accidents, multistandard style visors offer the most complete coverage and a broader spectrum of possible workarounds.

Learn more about the security norms. State-of-the-art technologies have allowed producers to produce hats that are very stable, light and highly wearable. The hats and heads must be equipped with an integrated, variable length belt and at least comply with EN 1384. Latest standards:

As a rule, the norms are compiled by a commission, in Europe each of the countries sends its own representatives to the ETC. The effectiveness of a new norm is checked every five years or after a formal appeal, and although a check does not necessarily result in a new norm, historical evidence has shown that a new norm arises every ten years or so.

BSI employees administer the BSI and review the results every two years. EN 13884 1996 / BSEN 1384 1997 with CE marking This norm is preceded by further siren of the state in which the safety helmet is to be checked, e.g. DIN EN 1384 for the test in Germany. This BS symbolises that the cap has been tried in the UK and although there should be no theoretical distinction, some EU member states have allowed the use of hats that may have broken when they have been tried in the UK.

Both of these are the same in terms of contents and represent a great step forward compared to the existing UK standard, as they offer lower border protectio n for the first and foremost. It is almost directly checked at the lower border (in contrast to 75mm from the lower border of BS4472 hats), so that the film has to reach the border.

It is the fundamental minimal requirement for almost all types of riding. This is the abbreviation for Product Approval Specification and was designed by the British Standards Institute (BSI) in answer to the concern about the development times for the later EN 1384.

In the first draft, we looked at the draft versions of the EU standards and chose the highest options. Following the formal release of EN 1384 in 1997, there were certain discrepancies between it and PAS015 which led to the 1998 review of PAS015 in order to eliminate these discrepancies and tackle new areas of protective measures, such as compressive strength and shock and vibration safety when landed on an angular area.

It has been reworked in 2011 with an elevated head and some other changes affecting the efficiency of hats. This is the US SEI Marked hat ASTM F1163: 2004a and is similar to PAS015:1998, although it does not involve either a side stiffness test (crushing) or a penetrating test, which means that these hats often have quite large vent or slits.

However, there are many types of helmet on the markets that have passed the PAS and EN1385 and ASTM standards. The Snell E2001 is the latest Snell Institute development in America. This is a higher level of achievement covering all the ASTM and PAS 015 features, but with a more pronounced hoof boss (to reproduce a hoofbeat or collision with a sharpened surface), higher collisions and an extra semi-spherical boss to create an irregular but not sharpened area such as a beam, gate or paved area.

This Australian norm is similar to EN 1384, but contains the test of the danger ampoic from PAS 015, but does not contain a penetrant test. Symbols of QualityKitemark Die Kitemark is a British Standards Institute trade name and may only be applied to a product that has been approved by the British Standards Institute.

In addition to the demands of the respective standards, e.g. EN1384 or PAS 015, the symbol indicates that the enterprise adheres to a strict control and test system. Businesses are obliged to give the Federal Office for Information Security unlimited entry to their office and factory and to allow periodic spot checks through charge and auditing audits.

The hats are only approved for sales after completion of the charge test, so that a callback of the products is avoided. The SEI Seal of Approval is the US counterpart to the Kitemark for ASTM-Standards. SEI is an organisation similar to the BSI, which has been established to verify manufacturers' assertions that their products meet the required standards.

The regulations cover type approvals and the inspection of the products. The hats must be inspected at least once a year, but the organisation must also have an in-house system of audits and certified controls, which may cover lot inspections. The five tricks standard test mark for the Australian QA system shows the Kitemark certified standard, which requires a lot test and tax inspection.

The CE marking is neither a sign of conformity nor a norm per se, but a manufacturer's statement required by EU legislation to prove that all the pertinent EU directives have been complied with. This has been established to enable civil servants to ensure that goods imported into a European country meet Europe's fundamental security standards.

According to the Personal Protective Equipments Directive, all protective equipments must carry the CE marking, which certifies conformity with the relevant EST. The hats mentioned above provide a high degree of impact, penetrating and retentive resistance. Horsemen who compete according to the regulations of a discipline or pony club or riding clubs should consult the relevant manuals for information on the permissible norms according to these regulations.

Statutory requirements When riding on the street, a child under the age of 14 must be wearing a riding cap in accordance with at least EN1384. BETA dealers are the best advisors, especially if they present the BETA Safety Course Certificate, which shows that they have been educated for the assembly of hats.

Mehr zum Thema