Snaffle Bits for Horses

Bridle for horses

Snaffle bit is the most common type of bit used when riding horses. Bridles that have two bits, a curb bit and a snaffle, or "bradoon", are called double bridles. Find out more about the correct use and the different types of bridle chisels for riding. Find a wide selection of horse teeth to suit your needs. Bridle bits, English or Western bits and gag bits for riders such as dressage and pony.

Bridle bits for horses - Western Bridle bits

Bridle mouths are a favourite option for horses of all age. The westerly bridles are flat and connected in the centre. Bridle mouths, which are used with O-ring, ring or D-ring bridles, are used to teach young horses to give in to stress or to teach older horses on exercise manoeuvres.

The snaffle chisels used with a kerbstone chisel are lever chisels and exert a lot of force on the horse's chins and chest. Snaffle pieces like Argentinian Bits or Tom Thumb Bits are used for young horses or beginners. Long-shaft snaffle bits have more lever action than short-shaft bits.

Select between soft mouths made of metal, brass, stainless steal, carbon steal or chrom. Bridle mouths are a favourite option for horses of all age. The westerly bridles are flat and connected in the centre. Bridle mouths, which are used with O-ring, ring or D-ring bridles, are used to teach young horses to give in to stress or to teach older horses on exercise manoeuvres.

The snaffle chisels used with a kerbstone chisel are lever chisels and exert a lot of force on the horse's chins and chest. Snaffle pieces like Argentinian Bits or Tom Thumb Bits are used for young horses or beginners. Long-shaft snaffle bits have more lever action than short-shaft bits.

Select between soft mouths made of metal, brass, stainless steal, carbon steal or chrom. We' ve got the widest range of the most loved bits at a price you can't match through our on-line auction, sale or our price comparison guarantee!

mw-headline" id="Action">Action[edit]>>

Snaffle bite is the most frequent kind of bite used when horsebacking. Made of a nozzle with a ring on both sides, it works with immediate force. Bridles that use only one snaffle bite are often referred to as "snaffle bridles", especially in British equestrian sports.

Bridles that have two bits, a kerb bite and a snaffle, or "bradoon", are referred to as bridles. Snaffle is not necessarily a little with an articulate tip, as you often think. It is a little snaffle, because it produces instant contact without any lever action on the oral cavity.

A single or double-jointed nose piece, although the most commonly used types for bridle bits, does not make any bridle. It is even a snaffle bridle with a bulbous jaw (a massive, slightly bent bridge) or a bridge bite. Curbstone necklaces or bands have no influence on a real snaffle, as there is no lever effect.

British horsemen do not attach any kind of kerb straps or kerb chains to a snaffle bite. Whilst some horsemen in the West provide the bands with a kerbstone band, it is merely a "limping" for the bands, has no lever effect and serves only as a security measure to keep the bands from being drawn through the horse's throat. The pet should open its mouth in order to keep the teeth from being bitten, which is avoided by the existence of a nose band in an Englishman's head.

Many horsemen (and a considerable number of saddle shops) do not know the real meaning of a snaffle: a little that has no lever effect. As a result, a horseman often buys an articulated mouth piece with shafts because it is called a "snaffle" and believes that it is smooth and friendly to be gentle because of the connotations that the name of the snaffle has.

Actually, the horseman has actually purchased a kerb bite with an articulated mouth piece, which is actually quite a heavy piece due to the combined nut-cracker effect on the pine and lever effect from the shafts. There is no shaft like a kerb or bite in a real bridle.

Though the kimber vetch seems to have a D-shaped chisel ring like a snaffle, the chisel tip is not centred on the ring, so that the rein produces a lever effect; the Uxeter kimber vetch has slits for the rein in the chisel ring, which allows the rein to generate an extra lever effect.

They are both used with a kerb necklace, so that the ring looks like a small shaft and produces a light lever effect, which makes it a kind of kerb. Also a real snaffle will not be able to slip up and down the ring of the teeth or cheek parts of the bridles, as this would place them in the class of toggle bits.

It is the more important part of a snaffle because it checks the degree of dentition weight. Intra-articular mouth: a double-jointed nozzle with a bone-shaped member in the centre. Reduce the nutcracking activity and promote the horse's relaxation. Dr. Bristol: a double-jointed nozzle with a thin square member in the centre, which is tilted and creates a point of contact.

It is similar to the traditional connection in France, but much smoother, as the connection lies flush against the centre of the lingua, lip and bridge and has no bruises. Gradual rotation: a one-hinged nozzle with a gentle rotation. Lots of small fringes increase the impression on the snout. Cavity: usually one-jointed with a thick, concave nozzle that distributes the force and makes the teeth less strong.

It may not go in the mouth of some horses when they're a little small. Half cheek: has only an upper or, more often, lower cheeks, in contrast to both in a full cheeks throat. Belly: has a ring on the side of the mouth piece, with a smaller ring at the top to fix the cheeks of the bridles.

Has a tendency to focus the print on the billets. It' very firm in the throat. But the most important thing when trying on is that no two horses are identical. Therefore, it is the rider's responsibility to find a piece that not only matches the horses (mouthpiece and ring), but also sits properly.

There are three major factors when assembling the snaffle: the jaw piece adjustment, the width of the teeth (from where the nose piece meets one ring to where it meets the other) and the width of the nose piece. Snaffle adjustment strategies differ between horses, but the most popular snaffle adjustment approach is to set it to create one or two folds in the lip at the edge of the horse's muzzle.

If you want to know how high a snaffle should be, the best way is to start with the teeth that only touch the corner of the horse's lips and form a fold. Sufficient flexibility should be left in the bridles when the horseman is holding the cheek parts of the bridles and pushing them upwards to lift the teeth in the horse's muzzle. However, there should be no excess space in the cheek parts.

Horses should keep their mouths shut above well-fitting teeth (chewing lightly is tolerable and a good indication of relaxation) and keep their heads still. It may be necessary to adjust a little higher or lower until the rider shows no symptoms of unease. There is little influence on the horse's weight due to the dentition level in the horse's jaw.

It is most efficient when set correctly. Incorrect setting causes only uneasiness, no heightened controls. Influencing the fitting of the teeth are the length of the entire oral cavity, the length of the gap between the front teeth and the teeth where the teeth rest on the rods (gums) of the horse's oral cavity, the width of the horse's mouth and the level of the oral cavity from nose to throat.

Horses with small mouths, thick tongues and low palates have less room for mistakes than horses with longer mouths, slimmer tongues and higher palates. The most important criterion when adjusting the bridle is that it does not strike the horse's tooth.

More worryingly, the dentition is not so high that it rubs the cheek teeth all the time, which can cause significant pain for the equine. If the setting is a little too low, even in the case of a short-mouthed animal, it will normally not come close to the front teeth until the whole balance is at danger of crash.

When the chisel is set too low (without contacting the angle of the mouth), it is primarily a risk to health and well being. Horses can get their tongues over too low teeth and thus avoid their own pressures. Furthermore, the effect of the teeth is changed and it does not affect the jaw as it was made.

If they are a little too low, they often open their mouth to avoid the pressures and can bite overly. The bridles can even drop off in the worst case when the horseman is pulling the rein firmly, thus lifting the teeth and relaxing the cheeks while the animal is rubbing, throwing or shaking it.

A lot of horses "wear" too low teeth themselves and keep them in the right place with their tongues. Some coaches, especially in the British equestrian discipline, recommend hanging the teeth a little higher so that they are in the right posture without the horses having to move them there. When the teeth are too high (depending on the horses, with three or more folds in the lips), they stimulate the lip, which over the course of the years leads to calluses and losses of soreness.

The immediate result, however, is that the horses feel a steady force on the rein and can no longer come loose, even if the riders loosen the rein. The result is that the horses become tensed in the mandible and resist the teeth. Especially when a too high bite is rubbing the cheek teeth, this unease causes the horses to throw their heads and otherwise show their discontent with the condition, resulting in bad perform.

Usually when the stallion throws his skull or tries to avoid a piece of it, an incorrect fitting is the cause, but other considerations should be taken into account. Riders must check with a vet that the horses have no tooth problems. And even the most gentle attitude can make a stallion uncomfortable in the hand of a saddle.

Comparing a regular egg stump bridle with a thin saddle-shaped saddle. As a rule, the bridle should not be more than 1/2 inches wide than the horse's muzzle. The jaws of a horseman can be judged by inserting a wood plug or a length of cord into the jaws where the teeth go and mark them at the edge of the horse's lip.

Too small can cause squeezing (which can be very strong in a ring ), and squeezing can cause behavioral disorders if the horses feel uncomfortable. Smaller sins are a little too broad, which does not squint the mouth, but does not allow efficient communications between horses and riders.

Also the nut-cracker effect of an articulated bridle is a problem; the hinge of a too broad nose piece hits the horse's jaws when the rein is pulled. Competitive regulations stipulate that the bits must have a minimal size, but no maximum size. A lot of people believe that a fat mouthwash is always a lighter mouthwash, because thin mouthwashes locate the stress on the staff.

Most of the horse's jaws, however, are almost entirely full of its jaw. This is why many horses (especially those with large, meaty tongues) favour a medium bore nose piece that offers a little more room in an already narrow muzzle. They can damage a horse's jaw. This is the complete book by Bits & Bitting.

Auch interessant

Mehr zum Thema