Used Jumping Saddles

Second hand jumping saddles

All Products > Saddles > Used saddles with close contact.

Extraordinary condition:

The saddles in this class show very little or no benefit at all. The saddles under this classification have very low and standard abrasion. Perfectly conditioned and easy to use semitrailer, very well cared for. The saddles in this class usually show slight to medium friction on the lugs of boot and stapes, usually with more friction towards the bottom of the lugs.

Slight colour variations may occur on the leathers due to perspiration, heavy rains or general abrasion, often on the keys, but usually on the seats and panel. The saddles may have some small but obvious cracks in the edges of the seats. Any very small area abraded by the skin on one or more of the pads is acceptable for this evaluation, but only if the pads showing this are under a hatch.

The saddles have a strong friction on the valves. Can show signs of cracking in the grain of the skin, mostly small and shallow cracking, often found on the seats and shelves. The saddles in this class may exhibit colour loss or significant colour variations due to perspiration, weather or general clothing. Calipers below this value may require substantial repair.

The saddles often have considerable tears and the leathers can be dehydrated. FUS cannot usually approve saddles that meet the requirements of a reasonable FUS valuation, but we can help you with repair work to get these saddles in a saleable state. Woollen flocking: It is the most traditionally used way to fill the panel of a seat.

Flocks are many kinds of flocks that saddlers will call wools. It ranges from a number of different synthetics to a number of different kinds of virgin sheep's wools. It will always be a discussion and no succinct consensus on which is the better one, but the higher quality saddles we wear will generally be filled with the best whatever is used.

Woollen is flocked and requires special care. Eventually it can become hardened and clump together and after a few years (and sometimes less) it must completely replace all the inside yarn. Woollen, when used on a single animal, tends to adapt over the years to the horse's physique, so it CAN be more difficult to use these saddles on several animals than on the other two, although this is not always the case.

But the big advantage is that it can be adjusted by a saddler without difficulty. Sometimes when you buy a used seat they are just right after unpacking, but you should rely on the ability to need an adaptation to get the individual fitting you want. A number of woollen boards also have a felt or sponge liner as a cushion between the woollen material and the board contact area.

Replacing a full refund and replacing woolen in a U.S. seat usually costs $200-350 and will require the panels to be rolled up and resewed, usually in the saddler's workshop. Optimizing the available wools reaches from about 75-300 dollars, with a vast bandwidth of costs due to different stall charges.

Easier customizations, which usually include the addition of yarn to certain areas and sometimes removing it from other areas, are usually done on-site. The majority of our saddles are woollen with flock. "Frenchspeaking" foam / latex: Anti-foam is just a trade-off. The foam is durable and virtually service-free as long as the seat suits your horses.

These saddles are easier to use on more than one horse as the froth does not adapt to the horse and stays there. There'?s no foaming. Otherwise, in cases where the pane needs areas that need more construction, the initial panes will be disposed of and new ones modelled.

Although the pad must come straight out of the stall, another advantage is that they are often easy to find when several horse fits. Nearly every harness in France is padded with polyurethane padding. It is the best of the best in the high-end saddles worn by us in Latexplatten.

Flock is the traditional in France, while wools are generally the British / Geman one. Lauriche, an original British nut made with expanded plastic sheets, is an exceptional case that occurs to me. Costs for adapting or retrofitting expanded plastic sheets range from $250 to $900, which depends on who does the work.

Autonomous upholsterers demand less than the workshop of the initial make of upholstery, but freelance installers specialising in foams are more difficult to find in the USA than in France. Schaumflocken is also often seen on spring saddles that are not of the French family. As a rule, conventional assemblers who specialize in wools are not big lovers of foams because there is not much they can do with them except swim with felt.

We have two major kinds (actually brands) of flocks. And one of them is Cair, which we find in the Bates and Vintec saddles. Every kind of flaking has its own pros and cons. Inflatable panel are extremely flexible and are ideal for distributing back support weight. Sheets can be made very softer or firmer as required.

Flair system has four tubes, two of them on each side of the seat.... The riding feeling is resilient, which varies according to the adjustment of the seat, but is always present. This can take some getting used to, and that's one of the main reason why we think we don't see it everywhere, even though it's great for the horse's back.

Under some climatic conditions, the expansion and contraction of the indoor climate can lead to changes in the seat's shape due to seasonality. It is a bit more tricky than with wools to find saddlers to set flair paneling, but simpler than with foams. Each producer has a different system for the height of the trees. Not only the real width and the distance of the points of the trees make up the width of a nut.

There is also the form and corner of the beam opening, along with the width and form of the plate. Although we will always quote the "official" or branded sizes that the producer may consider, we will still classify the saddles on-line according to a more general system to ensure consistent quality. When your pony has a mean width corresponding to the punched sizes in one make, it is unlikely that a mean width will work in all makes that have that sizes.

The Bates oesophagus theory is relied upon together with an informed optical evaluation to equip tree-sized saddles for Internet use. As the form also affects the overall dimensions, this system is still not ideal, but all along the line it will probably never be ideal. Inkonsistente Baumgröße and Fitform across all saddles is an important why we recommend used saddles.

If you are buying second hand, try the Extract nut you are looking for to build your own. In fact, there are differences in beam fitting that often occur between two saddles from the same manufacturer, even though they have the same punch sizing. Although a seat is made especially for you and your horses, you do not know what you will get until you have it.

Adjusting the seat is both an artistic and a scientific process. This does not necessarily mean that we are anxious to market your seat to give you exactly what you type here. Once your FUS seat has been personally inspected and approved, we will review and verify the real list with you.

As a rule, if you require more than the industry can handle, we will not ship the relevant seat. At all times we want to be sure that we can offer a seat to the customer's complete satisfaction before we agree to put it on. The most saddles have some information/codes engraved in the hide, usually under a hatch.

Often this information can tell us many facts about your horse, often with the precise date. Knowledge of this information can be very useful to us when it comes to guessing a likely retail margin before you actually see your seat personally, so please add it if it's not too much trouble for you.

We charge a lump sum of 25% for shipping saddles. Shipping costs for equipment (girths, leather, iron, seat cushions, etc.) are 40%. As a rule, we only admit hardware from clients who also send in a nut, unless several high-quality non-saddle articles are sent. Only branded valves of similar calibre to our saddles and in good or better conditions can be used.

When we find a fixable issue with your seat, we will contact you to fix it.... Otherwise, the seat may have to be given back to you at your own cost. Every semitrailer traded on a commission basis must have good, secure cudgels. Shipments must be reasonably neat and in good or better shape.

Even if we believe that a seat has been incorrectly presented on the shipment request, we retain the right to refuse it. All saddles we sell come with a 5-day test buy time, during which clients can try on and drive the bike. Full authorisation by full payment will be obtained and the customer will be liable for any damages to the seat during the probation time.

You will receive a cheque by post within 15 workingdays after the confirmed purchase of your seat at the specified postal location for the purchase amount less provision. Every shipment of your bike is tested with your insurance. Once you're signed in to your account, you can click this hyperlink to modify, remove, and perform previously stored sweeps.

Or you can call up your personalised query via the Manage Stored Queries function under My Accounts. You can also save new queries from there. If you are not registered at the moment of the scan, the scan will not be stored. Your quest will not be stored if you register a new user or sign in using this hyperlink.

Once we have listed all saddles that match your requirements, you will receive an e-mail notification. Any number of search queries can be stored and can be as generic or custom as you like. It is also possible to retrieve your previously stored queries using the Manage Stored Queries links in MyAccount.

Here you can create new queries, modify old ones, remove them or run them to see the currently available results. It is strongly recommended NOT to use the rigorous stored searching function so that you do not run the chance of missin a good opportunity. If you are looking for a 17 1/2" seating position, for example, you will also see those that we think are a little smaller (17 1/4") and those that we think are a little larger ("17 3/4").

Searching for trees in "Medium width" will return results that are between middle width and middle width, and between middle width and middle width.

Mehr zum Thema